EYE TO EYE

Designed for vehicles with M12 x 1.5 thread pitchFeatures:Used for wheels with 60 degree tapered seatingLong lasting finishSpecifications:Style: Open-endSeating Acorn, 60 degreeThread Sizes: M12 x 1.5, M14 x 1.5, M12 x 1.25, 9/16-18 and M1/2-20Available Colors: Chrome, Black, Blue, Red, Gold, Purple and Neo ChromeLug Nut Length: 40mmSpike Length: 40mmHex: 19mmPlease verify the size lug your vehicle uses before ordering.The finish on this lug bolt is achieved through several different phases. Such as cold forged carbon steel with enhanced rigidity through heat treatment. This is the correct way to finish a wheel. They have a beautiful finish with a superior sheen due to the additional layer of clear coat.COMPATIBILITY:Buyers are responsible for choosing the correct thread, seat, and nut type for their application.Please insure that your threaded stud length is at least 1/4" (6mm) shorter than the nut length listed above. Otherwise, you may need our extended model lug nuts.Please insure that you are purchasing the correct lug nut model for your wheel seat type.These nuts fit most factory wheels, but may or may not fit depending on your wheel. Please insure before purchaseThe photograph does not depict the superior finish of the wheel.Size and Pitch ChartThe pitch is measured by the distance between threads or the measurement of threads per inch for non-metric stud sizes. Below is a chart showing some of the popular car brands and models, as well as their respective thread size and pitch.Make and ModelYearThread Size and PitchAcura: RL2005 - present14 x 1.5Acura: Other Models1986 - present12 x 1.5Buick: Riviera1979 - present12 x 1.5Cadillac: Seville1980 - present12 x 1.5Dodge: Stratus1995 - present12 x 1.5Ford: Taurus1986 - present12 x 1.5Honda: All Models1983 - present12 x 1.5Nissan or Datsun: All Models1968 - present12 x 1.25Mitsubishi: All Models1983 - present12 x 1.5Subaru: All Models1977 - present12 x 1.5Toyota: All Models1968 - present12 x 1.5Size and pitch measurements are in millimeters. The unit represents thread size by pitch size; therefore, Acura RL cars from 2005 to present have wheel nuts with 14 mm thread sizes and 1.5 mm pitch sizes, for example.